Is the Ocean Avenger the RIGHT Beam Line for me? 

• Are you limited by the amount of space you can dedicate to beam fabrication?

• Are you limited by the amount of capital that you can invest in a beam line or beam fabricating machinery?

• Is your current method of beam drilling and beam fabricating too costly to compete with the bigger fabricating shops and do you lose out on those profitable big jobs?

• Do you have to turn away big jobs because you cannot physically process the larger and heavier profiles?

• Do the larger General Contractors skip your company when sending out the bids because you cannot process a large structural job or beam job fast enough?

• Do you struggle to find good quality fabricating labor when you land a large job, and do you have use valuable skilled labor to train your new recruits?

• If your layout man skips work for a day or two, does that affect your ability to process and fabricate beams?

• Are you struggling to land steel fabricating jobs in your market? Do you feel your competitors are throwing out insanely low numbers to land the work?

• Are you finding that you are struggling to make any money on the jobs you land - those jobs that you bid low enough to get leave, no you profit at all?

• Do you want to make more PROFIT?

If you answered YES to any of the questions above you are a prime candidate for the outstanding Ocean Avenger Beam Line, built by Peddinghaus USA.

Now lets take a close look at the picture of the Beam Fabricating Industry below and see where you fit in. 

If you are not sure of your monthly tonnage, a good rule of thumb is that each man on the floor involved in beam fabrication can contribute a maximum of 15T per month of drilled beams.

For example: 2 layout men and 3 mag drillers = 5 men x 15T = max of 75T per month  

1.  If you are doing more than 400 Tons of beam drilling per month (total fabrication tonnage around 600T or more), then a multispindle beam line is the beam drilling line for you.  However you might already have a multispindle beam line and still be looking for additional beam fabricating capacity, and either have limited space to put it, or might not want to lay out another $300,000 to $600,000.  Then the Ocean Avenger Beam Drill Line would be a perfect supplemental Beam Line for you.	Doing more than 400T p.m. of Beam Drilling? Use a Multispindle Beam Drill Line Use the Ocean Avenger Beam Line as a perfect supplemental beam line
2.  If you are doing between 30T per month and 400T per month of beam drilling (total fabrication output is somewhere between 70T and 600T per month), then the Ocean Avenger is the perfect beam line for you! It will process beams at the LOWEST COST PER HOLE DRILLED, and this is what every fabricator wants to achieve! Being the low cost producer is what creates margin and margin in turn yields profits.	Doing between 50T and 350T p.m.  of Beam Drilling?  Then buy Ocean Avenger Beam Line TODAY, as this machine will completely change the profitability of your company. Ocean Machinery has sold over 150 spindle beam lines to small-to-medium fabricators since 2002.
3.  If you are doing less than 30T per month of beam drilling, then the most cost effective way to drill beams is with a mag drill. Portable punching units are also an affective way for lighter beams with thinner wall thicknesses. If you are looking to increase your beam fabrication, then you are definitely the ideal user of the Ocean Avenger Beam Line!	Doing less than 30T p.m. of Beam Drilling? Use Mag Drills or Portable Punches Get the Ocean Avenger as a perfect beam line to increase your beam drilling capacity in your fabricating shop.

Call Ocean Machinery today TOLL FREE at (800) 286-3624 or (954) 956-3131 to get your video and brochure of this truly amazing beam drill line. 

To receive your free video and brochure on this amazing Beam Line,

please complete our beam line video and information request form

We can arrange for you to see the Ocean Avenger Beam Line working in a fabricating facility.

Call Ocean Machinery TODAY